A Belated Happy Typewriter Day: L.C. Smith No. 8

I am a little late to the Typewriter Day party, but I did religiously observe the holiday by bringing home a new typewriter (as is customary I understand).  This 1922 L.C. Smith No. 8 was on Craigslist, described as “a hobby project to rebuild”. I liked the big cast-iron machine with its beautiful decals and the weird squid tentacle of a right carriage return lever. It looked pretty dusty and rusty.  It apparently needed repair, but it still had a ribbon in it.  I always take the presence of a ribbon as a hopeful sign.  Things can’t have been that bad for that long a time if the ribbon remains. Right?

I carefully compared the Craigslist photos with other L.C. Smith 8 examples on Typewriter Database and determined that as far as I could tell, all the pieces were there except for the ribbon spool lock screws.

I drove over to look at it and was relieved on two counts.  One: the seller was a very normal person and extremely nice.  Two: the typewriter didn’t seem to have anything more wrong with it other than rust, dirt, and gunk.  Though the carriage wasn’t moving and it really wasn’t typing, if I pulled hard to the left, the carriage moved with typing.

The seller, for his part, seemed very happy that I was going to try to fix it and clean it up.

I brought her home.  The typewriter and I had drinks together out on the patio and got to know each other.


The horsey paper table decal is in good shape. The insane surrealist horse legs in this decal are The Best. Is that top horse trying to type with its hoof? Trying to stomp the typewriter?


After a long search I finally located the serial number on the inside of the right front frame behind the back space key under a thick layer of grime and determined that I had a 1922 L.C. Smith No. 8:


L.C. Smith No. 8 serial number located in front right frame area right behind the back space key

It was pretty rusty, especially underneath the machine.  It may have sat in water at some point in time. One foot was missing and another foot (probably a replacement) was hideously swollen and deformed.


I dusted the typewriter first with a soft brush to loosen the debris and then blew out the insides.


I cleaned and lubed the carriage rails with PB Blaster and the typewriter’s carriage began to move on its own with typing.   Everything seemed to function, albeit slowly, screechingly and rustily.

The one thing I had problems with was the ribbon carrier/vibrator – it wasn’t moving at all.  I did some research on the mysterious “Ribbon Key” in the L.C. Smith No. 8 manual I found in the manuals archive of The Classic Typewriter Page.


It was in the “stencil” position and once I switched it to a regular printing position, the ribbon vibrator began to move. Whew. I was also happy to find out that the “Ribbon Key” has high and low positions for red or black printing.  I love those red and black ribbons.

During the time when I was trying to figure out the ribbon vibrator problem, I poked around in back.  I saw a loose piece of metal wedged under the universal bar.


Here I am pulling the piece of metal out with my dental pick

Oh no, I thought.  Is it a broken piece of the ribbon vibrator mechanism?  I pulled it out.


It looks like a typewriter part, but stamped on it are these words:

CLIPRITE, 37 Maiden Lane, NY USA

I did a quick Google search and found that it was an antique cigar cutter similar to this one. The image in my mind of someone smoking cigars and pounding away on this old typewriter Back in the Day gives me a chuckle. “Dammit, where’d my cigar cutter go?”

Here is 37 Maiden Lane in New York where the Cliprite company used to be headquartered:


I am going to de-rust, de-grease and clean the typewriter over the next few days. One aesthetic issue is the areas of flaking black paint.


Should I stabilize those flaking areas or remove the flaking edges of paint?  Should I cover bare metal areas? Sharpie or Testor’s black paint pen?



14 thoughts on “A Belated Happy Typewriter Day: L.C. Smith No. 8

  1. I love the cigar cutter! It’s going to make me smile all evening. Does it, or will it still work? A great looking typewriter, I think the three wild horses on the decal are extra special. I’ve used a sharpie on small areas of flaked paint, and on slightly larger areas, enamel for models, which dries nice and flat with no brush marks, but nothing as much as the areas you have there…


    • Exactly right. I was cleaning today and wondered why those two keys were sunken – I flipped the machine over and – oh, then it registered. Fortunately, the linkages are not mission-critical and probably easily reproduced.


  2. I’d be tempted to leave the areas of bare metal, unless you are going to strip the whole thing down and get it stove enamelled, you’ll never match the original finish. I think the sharpie treatment might look worse, given there’s no body of paint.


    • I tested Sharpie in a small area – not great. I am next going to test a thin layer of Testor’s model paint. If that doesn’t look right, I’ll leave the bare metal as is – battle scars of a long life.


  3. Have been experimenting lately on my RP2 for its rusty-spots. Permanent marker does darken, but the ink has a colored hue (blue or brown) and can get stripy. Didn’t want to risk actual paint (not removable), had good results so far with Encre de Chine (India Ink). Applied with a soft, small (0) brush. It is proper black and the shine is a reasonable match for the original paint finish.

    Small parts such as ribbon-spools I’ve re-painted, black from spray-can from the autostore. At least two thin layers with (much) fine-grade sanding it all smooth.

    Good luck and much enjoyment on this machine!


    • I ended up rubbing a very thin layer of model paint on the bare spots – it’s not bad, but I want to compare it to India Ink. Thank you so much for the suggestion. The spools may need to be sanded and sprayed since the paint is peeling badly on those


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s