Ghost in the Machine

I have been working on the Royal FP, carefully cleaning and testing for skipping.  The typewriter still skips when keys are pressed rather than jabbed. The skipping only occurs when I use a Pressing Massage typing technique – which isn’t considered great form but is fairly common in “inexperienced operators” who aren’t familiar with manual typewriters. There is no skipping at all with the textbook staccato jab.

I decided to adjust the escapement trip just for funzies to see if that would affect the skipping situation.  I needed to identify the escapement trip adjustment screw, and Richard Polt recommended that I take a look at the 1945 Ames Service Manual and the 1968 Ames Service Manual which are both archived at the Classic Typewriter Page in the typewriter manuals section. They both had the information that I needed.

Here’s the important diagram that identifies the trip adjustment screw from the 1945 Ames Service manual:

escapementAction

I mentally rotated this diagram in my head and determined that this screw that I spotted through the springs in the bottom of the typewriter was the trip adjuster (I had turned the typewriter on its back to see this):

adjustment2

Sighted through palm fronds. Dr. Livingstone, I presume?

I loosened the lock nut (7/32″ wrench) and rotated the adjustment screw (3/16″ wrench) clockwise to make the escapement trip when the type slugs were further from the platen. This did not affect the skipping; in fact, the stuttering skipping seemed worse. I turned the adjustment screw counter-clockwise to have it trip closer to the platen.  That did not improve skipping.  I returned the adjustment to its original state (tripping 1/4″ to 3/8″ from the platen), tightened up the lock nut, and called it a day.

I may try adjusting the trip on individual keys since the skipping seems only to occur with keys in the center of the keyboard (eg “h”, “g”). I don’t know.  I don’t want to throw a perfectly wonderful typewriter out of adjustment as a concession to bad technique.

The Davis Brothers produced a very funny video on typing technique. The gist: many output problems like skipping, piling, and shadowing are related to operator error – plain old poor technique. Check out their video – it’s entertaining and informative.  It features a particularly beautiful red Smith-Corona Galaxie.

I have to concentrate to simulate the strange, lingering touch required to reproduce the skipping in the FP. I am going to follow the Davis Brothers’ lead, chalk it up to poor technique, and try to educate users in good typing technique. As the 1945 Ames Service Manual puts it:

amesServiceManual

Color Poll

As you may recall, I am considering a re-paint of the ribbon cover, front plate and paper table of the FP. Here are the results of the poll that asked “What Color Should I Paint the FP?”:

pollResults

I ordered some coral pink powdercoat paint (RAL 3017). I am still debating about whether I should paint the typewriter. At least one person polled felt that I shouldn’t do anything to it. That gives me pause.

And Now for Something Completely Different

Moe has a lot of friends with terrific typewriters.  Her friend Alan had an Underwood Standard Four Bank portable that he wanted me to look at.  It needed a new ribbon and a cleaning for sure.

baseoff

I took the typewriter off the base.  Instead of latches, I removed two medium sized screws with associated springs to free the machine from the base.  I am glad I did.  It was filthy under there.

The typewriter was missing one of its knurled thumb nuts that hold the ribbon spools on.  Some time in the past, someone had substituted a round nut for the missing thumb nut.  It works great, but it isn’t a very close match to the original thumb nut.

replacementThumbNut

This got me thinking about spool thumb nuts that go missing – lots of different sites online sell knurled thumb nuts in different sizes for a variety of applications.  I have seen typewriter-specific thumb nuts before too.

This machine was otherwise in very good cosmetic shape with glossy paint and lovely decals. Obviously it had been well-protected in its case over the years.  However, it did smell very musty.  I’ve found that much of the odor from stinky typewriters comes from their old stinky ribbons. So: out with the old and in with the new.

I love the look of a red and black ribbon on a typewriter, and I have a stash of brand new ones that I ordered from Oregon.  I always test a typewriter with a little scrap of red/black ribbon to make sure that the ribbon carrier is rising and falling properly so that text is all black or all red on typing.

testRibbon

I hate to re-spool an entire length of red and black ribbon only to find out that the typewriter types half red / half black in print. Sometimes I just can’t get the ribbon vibrator to cooperate despite cleaning and lubrication.  In those cases, I just install a solid black ribbon.

newribbonoldspool

With my finger, I quickly spin the new ribbon onto the old spool.

Once I confirmed that the ribbon carrier was rising and falling properly, I needed to re-spool.  This machine had metal spools so I re-spooled the new ribbon onto the old spool. I know that I could do this on the typewriter in the spools holders, but I don’t like to get the machine dirty and smudgy with ink. And sometimes the plastic spools don’t fit on the typewriter spindle.  I usually set up a spooling set-up with bamboo skewers so that I can quickly move ribbon onto the old metal spool.

The typewriter was pretty dusty and a bit gummy, but it was typing great after I cleaned the segment.  I cleaned the slugs. Elite typeface is the worst to clean.  It never looks as crisp as I want:

02

I scrubbed the “a”,”s”, “f”, and “d” a little more.

As I was putting the typewriter through its paces, the “8” key would hang up and its typebar would not return to resting. I turned the typewriter on its back and peered around. I struck the key again and the typebar returned to resting. And then it happened again and again to different letters. I’d continue testing and then an adjacent letter such “6” would get stuck in the “up” position:

typeBarStickingUp

My hunch was that the linkages for the typebars were somehow colliding underneath the machine.  I focused my investigation on the linkages near the segment and watched as first one and then another typebar would get stuck in an “up” position. Perhaps there was a bent linkage? Sometimes several would get stuck up together, but I found that just turning the typewriter onto its back to look around and sometimes hitting the shift key helped free the typebars to return to resting position.

The Neural Thumb Net

After it happened for the 100th time, I propped the machine onto its back and got some better light. Lo and behold: the ghost of thumb nuts past.

thumbNutJammedInLinkage2

Blender says: I told you that you weren’t looking in the right spot.

thumbNutInKeyLeverLinkage

I jumped up and down, shouting, “It’s the knurled thumb nut! It’s the knurled thumb nut!” My husband shouted from his office, “What’s a neural thumb net?”

I worked the nut free from where it was jammed in the key lever linkages using a dental pick and retrieved it from between the typebars using a pair of needle nose pliers:

thumbNut

Oh joy!  The matching thumb nut! And no more crazy typebar jamming! I can’t tell you how thrilled I was to solve two problems at once.

I was packing up the typewriter for Moe’s friend Alan when I remembered that the ribbon feed wasn’t working in one direction. Darn. I had made a mental note to investigate when I first noted it. Ribbon feed disorders can be so frustrating.  At least it was working in one direction.

There was a dangling feed ratchet thing hanging from the right spool. It had a hole in it that said, “Hey, I need a spring here!”

spooling

I found the teeny disconnected spring way, way under the spool cup and re-attached it – and yay, ribbon feed in that direction was functional once again.

Here’s something fun about this typewriter: it’s carriage shift, and the ribbon cups move up and down with shifting:

Wacky, huh? Like its eyes are bugging out on shift.

I am having problems nailing down a date for this beautiful 192X Underwood Standard Four Bank Keyboard portable. The serial number is 4B84031.  It’s probably an early-ish one since it has only one platen knob, a metal shift lock key and an unusual carriage return lever (Richard Polt has a similar Underwood Four Bank that he dates to 1926)

01

04

09

paperTable

Lessons learned in this episode:

  1. If your typewriter is missing a part, check inside the machine first.
  2. Never underestimate the value of good lighting
Advertisements

Number 12 the Royal FP

Ari S. just brought home a Royal FP and Richard Polt just threw an FP into his trunk.  It’s raining FPs. That got me thinking about the Royal FP at Moe’s  shop down the street that has been languishing on her shelves for more than a year.  I first saw it last May:

may2015

Across a crowded room…

The SCM electric has since been sold and I bought the Olympia SG3.  I passed on the FP because its Magic Margins weren’t working.

Moe is now thinking about giving it away.  I told her that maybe I could fix it, so I brought it home for a look-see.

I feel bad that this Royal FP did not get any love.  I understand that they are marvelous typewriters when they are clean and happy. It’s pretty beat-up with lots of scrapes and dings. Perhaps a re-paint is in its future?

Well-known San Francisco columnist Herb Caen used an FP, so you would think this FP would get a lot of love here in the SF Bay Area.

By Uyvsdi - Own work, Public Domain, https://commons.wikimedia.org/w/index.php?curid=11786284

By Uyvsdi (Own work) [Public domain], via Wikimedia Commons

Apparently Herb Caen was a bit of a typewriter polygamist.  According to Wikipedia, he had four Loyal Royals. Here he is with what looks like a Royal HH:

By Nancy Wong - Own work, CC BY-SA 4.0, https://commons.wikimedia.org/w/index.php?curid=35839973

By Nancy Wong (Own work) [CC BY-SA 4.0], via Wikimedia Commons

Anyhoo, I brought this under-loved and under-appreciated typewriter home. Here’s Moe’s FP:

DSC04079

The typewriter was typing, but setting the margin on the left using the Magic Margin was not working (the right Magic Margin was a little slow but working).  I hoped that it was a gummy/dirt problem that would resolve with cleaning.

The tabs were sluggish, but repeated tabbing freed them up, so I was hopeful about the margin problem – it may just be gummy.

The serial number is located next to the left ribbon spool:

DSC04028

FP = model, E= elite + serial number 6800093 which puts it at 1959 according the Typewriter Database.

What does FP stand for?  Flippin’ pachyderm? Formidable package? There was a discussion at Typewriter Talk last year about Royal model names and a former Royal employee who is a forum member said that FP = Fortune Peter Ryan who was President of Royal Typewriters starting in 1951. F.P. Ryan was the grandson of Thomas Fortune Ryan, the railroad, banking, tobacco, insurance, and transportation magnate who financed the incorporation of the Royal Typewriter Company in 1904.

Here’s a teaser from a 1951 article about F.P. in Time magazine:
http://content.time.com/time/magazine/article/0,9171,821750,00.html

This makes me want to get a subscription to Time just to read the rest of the article. I am happy to read that Fortune Peter (a great name) started at Royal as an apprentice mechanic despite being a Yale man.

Back to the typewriter at hand. I like these genuine Royal clear plastic spools:

DSC04037

This FP is typing great right out of the box.  There was a little stiffness that worked itself out with the quick brown fox:

DSC04046

Elite and and very dirty slugs. Wonderful typewriter.

DSC04067

I pulled out a piece of cardboard that was jamming the indexing.

This typewriter’s name is Number 12. I don’t know what happened to the other eleven.

DSC04082

DSC04085

DSC04058

Look on my works, ye Mighty, and despair!

DSC04061

I took off the ribbon cover, front panel, side panels, paper table and back panel and gave the typewriter a good blow-out with the air blower thing.

stripped

The foam insulation inside the machine crumbled to the touch, so I scrubbed it out with a toothbrush and blew it out with compressed air and vacuumed.

disintegratingInsulation

Gummy Lever

The carriage return lever had no BOING. It was stuck in a gummy way.  I worried that there was a spring missing, but all it needed was cleaning and lubrication under the lever:

carriageReturnLever

Now it’s great – BOING – BOING – BOING.

Mystery Margins

I may have mentioned it before, but I am not a fan of complicated margin setting features like Remington’s KMC, Hermes Weirdie Margins™, and Royal’s Magic Margins.

In my mind, this is the perfect way to set margins. Thank you, Smith-Corona Silent-Super, for keeping it simple:

DSC03940

Right in front and what you see is what you get. This is the best system for me.

Magic Margins: those I don’t like so much. I always am flipping the paper table up, peeking back there to see what’s going on. It’s a mystery.

magicMargin

I had problems setting the left margin on this Royal FP, so I investigated when the typewriter was more exposed. There is this complicated set up with long springs and a margin setting mechanism.

cleaningMagicMargin

I used denatured alcohol to clean the Magic Margin parts.  Ta-da! I then had a functional left Magic Margin. I followed up with a little PB B’laster for lubrication.

Skippy the Royal FP

I think I have pretty good technique when it comes to typing.  I admit I am not a touch-typist – I use two to three fingers.  However, I do have a forceful and quick staccato touch that really does the job. My printed pages are crisp and dark. I type like Olive Oyl.  I didn’t think there was any other way to use a manual typewriter and then I observed people pressing the keys as if they were giving the keyboard a caressing massage. What the heck?

Well then.  I used to test my typewriters after cleaning with my proper “Staccato Hot Keys” touch.  Now when I test, I try to imitate The Pressing Massage to see if there is any residual stickiness in the typebars – which is very noticeable with The Pressing Massage.

I tested this FP after cleaning the segment with denatured alcohol. With Staccato Hot Keys touch, there was no problem.

But check out the crazy skipping when I did The Pressing Massage:

There’s a little stutter and the escapement is twice triggered when I press instead of jab. The Pressing Massage seems like poor technique to me, but I wanted to see if I could decrease the skipping.  This typewriter may someday make its way into the hands of someone who uses The Pressing Massage and I don’t want that person to experience the frustration of skipping.

I haven’t experience skipping before (maybe because I use the Staccato Hot Keys Technique), but it is exasperating to those who experience it.

It’s hard for me to emulate the typist who uses The Pressing Massage, but when I do it right (or wrong?) I can consistently reproduce the skipping.

skipping

The skipping seemed to be worst with the keys in the middle of the keyboard, especially g, h, b, r, and 5. I first cleaned the escapement with denatured alcohol – it’s not as accessible as on other typewriters – and then gave it a quick squirt of PB B’laster.  I also very thoroughly cleaned the segment where the skipping was worst. I feel like the skipping with The Pressing Massage eased up a little, but it persists.

Backspace Does Not Erase had a skipping problem with a Remington Noiseless Portable which he rectified with an adjustment to the escapement trigger. I have a completely different machine, but such an adjustment might fix my Royal standard.

I went to the D. E. Fox repair manual (found in Typewriter Database‘s document library) and found this in the section for Royal standards:

deFox

D. E. Fox Typewriter Repair Manual, 1950, pp. 79-80, TWDB

I am hesitant to make adjustments – especially since I don’t have a “Special Dog Washer”.  The typewriter currently types great – if used by an “experienced operator”. I am in a kind of WWJD situation.  I am fairly certain that this typewriter will make its way to the collection over at The Shop at Flywheel Press where “inexperienced operators” roam.  Can they be educated in the touch needed to make this FP sing?

Aesthetic Appeal

Technique-related skipping aside, I want to address the Royal FP’s appearance.  The ribbon cover is pretty banged up.  Would it be blasphemy to repaint?

DSC04055

I am feeling pretty good about my sandblasting and powder coating skills, so I think I can do a quality repaint of the ribbon cover, front plate, and paper table.

I am leaning toward a coral pink.  I am not really a pink typewriter person, but I recently saw a coral pink FP on eBay that was very popular. If this FP were another color, would it get the love it deserves?

Here are some powdercoat color possibilities from Prismatic Powders:

 

What do you think?  Here’s a poll: